Commera Finance(307) 667-1250Get my funding options

Guide

Equipment Financing Companies: How to Compare

Equipment financing companies compared: banks, captive lenders and independents, a 0% dealer offer vs a cash rebate worked out, and what to get in writing.

Contractor in a canvas jacket holding two sheets of paper beside a compact excavator on a dealer lot
A contractor weighing two written offers for a compact excavator before choosing a lender. Commera Finance
In this guide
  1. Overview
  2. What are equipment financing companies?
  3. Banks, captives and independents: who funds what
  4. What equipment finance companies check before they quote
  5. Worked example: 0% dealer financing or the cash rebate
  6. Worked example: a bank quote and an independent quote on an $80,000 machine
  7. How to compare written offers from equipment lenders
  8. When an equipment finance company is the wrong fit
  9. Frequently asked questions

Overview

Equipment financing companies are banks, manufacturer finance arms and independent lenders that pay for your machine and collect fixed payments over a set term. To compare them, put every quote on the same numbers: amount financed, cash at signing, payment, total repayment and estimated APR.

A low rate can still be the costlier deal. A 0% dealer offer often replaces a cash rebate, and a bank may ask for a larger down payment. The worked examples below price both trades.

What are equipment financing companies?

Equipment financing companies are lenders and lessors that pay for a business's machinery, vehicles or technology and collect fixed payments over a set term, with the equipment usually securing the deal. The machine is the collateral. So these loans can be easier to get than unsecured credit.

Some providers also write leases. With a lease, you rent the asset rather than buy it. This guide sticks to who provides the money and how to compare offers. For loan mechanics, see how equipment financing works.

Commera is a broker, not a lender. We compare offers from our lender partners.

Banks, captives and independents: who funds what

Equipment finance in the U.S. comes from three main kinds of companies: banks, captives and independents. Captives are the finance arms of manufacturers. The Equipment Leasing and Finance Association tracks new volume from all three groups each month.

In September 2026, new business volume among surveyed ELFA member companies was $11.8 billion, per the ELFA CapEx Finance Index. Banks added $5.5 billion, captives $4.0 billion and independents $2.1 billion, according to the same ELFA report. The industry average approval rate was 77.7%, and 80.0% for small ticket deals, per ELFA.

Provider typeWho it isWhere you meet itWhat to check first
BankA depository institution that lends on equipmentYour own branch or business bankerDown payment, existing relationship, how long the paperwork takes
CaptiveThe finance arm of the equipment manufacturerThe dealer's sales desk, often with promo ratesWhether the promo replaces a cash rebate
Independent finance companyA non-bank lender or lessorOnline, through vendors or brokersFees at signing, rate, term and the lien it files
BrokerAn intermediary that sends one file to several providersOnline or by referralHow it is paid and how many offers you see

A business loan broker does not lend. It collects quotes from several providers. You then compare them side by side. Commera charges no fees to applicants and is paid by funding partners on a completed transaction, per the Commera equipment financing page.

What equipment finance companies check before they quote

Equipment finance companies start with the asset, because the equipment is the collateral. Then they look at the business and the owner, per the Commera equipment financing page.

  • Time in business: typically one year or more, though startups may be possible with stronger credit or a down payment.
  • Owner credit: around 600 or higher, with lower profiles priced accordingly.
  • Down payment: often 0% to 20%, depending on credit, equipment type and age.
  • Vendor quote: with one in hand, approval typically runs 1 to 3 business days and funding 2 to 5, per Commera.

The lender usually pays the vendor directly. Every one of these points is subject to underwriting. A lender can also ask for bank statements or tax returns.

Worked example: 0% dealer financing or the cash rebate

Dealer finance manager and a contractor talking across a desk in an equipment showroom with a tractor behind
At the dealer's desk, the 0% offer and the cash price are two different deals to compare. Commera Finance

Dealer promos often make you choose between 0% financing and a cash rebate, and the fine print usually says the two cannot be combined. The illustrative example below prices that choice on a hypothetical machine.

Methodology: Commera illustrative calculation, not an offer and not a real deal. The machine price, outside loan rate and doc fee are assumptions, and payments fall at the end of each month, with totals from the unrounded payment. Est. APR is the IRR of the amount financed minus fees at signing against the monthly payments.

ItemA: dealer 0%B: take the rebate, outside loan
Machine price, $120,000120,000
Rebate, $012,000
Amount financed, $120,000108,000
Interest rate, %0.008.50
Term, months6060
Doc fee at signing, $0400
Monthly payment, $2,000.002,215.79
Total repayment, $120,000.00132,947.12
Total cost incl. fee, $120,000.00133,347.12
Est. APR, %0.008.66

At 8.50%, option A costs $13,347.12 less in this Commera illustrative calculation. The 0% offer still has a price, though, because you give up the rebate, so you borrow $108,000 of real value and repay $120,000. That works out to a hidden cost of about 4.23% est. APR, per this Commera illustrative calculation.

The rebate wins only if an outside loan beats that cost. With the $400 fee, the break-even rate is about 4.09%, per the same calculation. Above that rate, take the 0% offer, and below it, take the cash and finance elsewhere.

Always compare a 0% offer with the cash price, not the sticker price, as this Commera illustrative calculation shows.

Worked example: a bank quote and an independent quote on an $80,000 machine

In this example, the bank quote has the lower rate and the larger down payment. An independent quote asks little cash upfront. It costs more over the term. This example puts a number on that trade.

Methodology: Commera illustrative calculation, not an offer and not a real deal. Rates, fees, terms and down payment are assumptions, and payments fall at the end of each month, with totals from the unrounded payment. Est. APR is the IRR of the amount financed minus the signing fee against the monthly payments.

ItemBank quoteIndependent quote
Down payment, $16,000 (20%)0
Amount financed, $64,00080,000
Interest rate, %7.7511.50
Term, months6048
Fee at signing, $2501,600 (2%)
Cash at signing, $16,2501,600
Monthly payment, $1,290.052,087.12
Total repayment, $77,402.73100,181.79
Total cost incl. down payment and fee, $93,652.73101,781.79
Est. APR, %7.9212.58

In this Commera illustrative calculation, the independent quote keeps $14,650 in your account at signing. That cash costs $8,129.06 more in total, and the monthly payment is $797.07 higher for 48 months.

Is the cash worth it? Only if you have a clear use for it that earns more than that gap, per the same example. If the money would sit idle, the bank quote is cheaper.

How to compare written offers from equipment lenders

Landscaping business owner in work gloves reading a multi-page contract on a pickup tailgate at a job site
Read the written offer line by line on the job site before signing anything. Commera Finance

Written offers from equipment lenders compare cleanly only when each one shows the same items. Some states require a provider to list them. New York and California are two examples.

New York Financial Services Law §804 sets disclosures for closed-end deals, which §801 defines to include equipment financing that is not a lease under UCC 2-A-103. Under §802, financial institutions, true leases and deals over $2.5 million are exempt. California Financial Code §22802 applies to offers up to $500,000, including lease financing with a purchase option. Under §22801, depository institutions are exempt.

A bank quote or true lease may skip these disclosures. Ask for the same numbers anyway. This is a description of the rules, not legal advice.

Example: what to get in writing

ItemWhat to ask for
Amount and disbursementThe total amount financed and what reaches the vendor after any fees are withheld
Finance chargeThe total dollar cost of the financing, including fees you cannot avoid
APRAn annual rate that includes unavoidable fees, not just the interest rate
Total repaymentThe disbursement amount plus the finance charge, in dollars
Term and paymentThe number of months, the payment amount and how often it is due
Avoidable feesLate fees, returned payment fees and any other charges you can avoid
Early payoffWhether paying off early costs more than interest accrued to date
CollateralWhether the security interest covers only the machine or more

Collateral needs its own question. Under UCC 9-504, a financing statement can say it covers "all assets or all personal property." Ask whether the filing names only the machine. Our guide to the UCC lien explains what a broad filing does to future credit.

When an equipment finance company is the wrong fit

An equipment finance company is the wrong fit when you need general working capital. The money is tied to the specific asset. It is also a poor fit for assets that wear out faster than the term, because you would keep paying for dead equipment.

For cash flow needs, compare products first in MCA vs. equipment financing. For terms, uses and timelines, see our equipment financing options. When you are ready, check your funding options with one short form.

Broker disclosure: Commera Finance is a broker, not a direct lender. Financing providers make their own eligibility, underwriting, approval, pricing, and term decisions.

Sources

Notes and disclosures

Figures on this page are illustrative estimates only and are not an offer of financing. All amounts, rates, factor rates, terms, payment amounts, timelines, and qualification criteria vary by lender, depend on funder underwriting and your business's bank statement history, and are subject to change without notice. Nothing here is guaranteed until a funder issues terms and you sign them. Factor rates do not represent APR. Commera is a broker, not a lender, and does not set rates.

This article is for informational purposes only, not legal or financial advice. Talk to a qualified advisor before making financing decisions, and a lawyer for specific legal questions about commercial financing.

Frequently asked questions

Should you use the dealer's financing or your own?

Compare the dealer's zero-rate offer with the cash price after any rebate, not with the sticker price. Work out what the zero-rate payments cost against that cash price. Then get an outside quote on the cash price. If the outside rate, with fees, is lower than the hidden cost of the zero-rate deal, your own financing wins.

Do equipment finance companies check personal credit?

Yes, most look at the owner's credit as well as the business. Per Commera's equipment financing page, owner credit around 600 or higher is typical, and lower profiles are priced accordingly. The final decision belongs to the lender. Time in business and the down payment also count.

Will an equipment lender file a UCC lien?

Often, yes, because a lender usually files a financing statement on the equipment it finances. The real question is how wide the filing is. Some filings cover only the machine, while others cover all business assets. Ask before you sign, because a broad filing can make the next lender hesitate.

See what your business qualifies for.

Two minutes, no hard credit pull. We'll match you to the right funding, pre-qualified offers in 24 hours.

How much funding do you need?